2020-02-04

How to Replace Kodak Printer Printhead?

Are you looking for the best solutions to remove the Kodak printer printhead? If yes, then you don’t need to search for it. Because we Brought the best solutions to replace Kodak printhead. Through the help of the given solutions, you can easily fix this issue. If you need help, then you can contact the experts, they will give you one of the best solutions without any delay. They will provide you one of the best solutions in less time. To get eliminate this type of problem, apply the given solutions without any delay. The experts are available at 24*7 at your services. Therefore, you can easily contact the Kodak printer support team to eliminate all types of errors.

Solutions to remove Kodak printer printhead

To remove the printhead of the Kodak printing device, you can apply the given solutions in sequence. These steps will help to solve this issue in a few minutes. To fix this problem apply the given steps.

To fix this issue, you need to make sure your printing machine is on.
After that, you will need to lift the printer access door and wait for the carriage to move to the access position.
Replace both ink cartridges and set them aside.
Unlatch the used printhead by lifting the button that is established in the center of the carriage.
Unlatch the used printhead through lifting the key in the middle of the carriage.
Lift the used printhead out of the carriage.
Replace the new printhead from its bag.
Replace the plastic protective caps.
Then, you need to place the new printhead into the carriage.
Push the target label of the printhead again until you hear a loud beep.
Enter the black ink cartridge into the printhead.
After doing this, you need to press down on the ink cartridge until you hear it hit into position.
Repeat steps 10-11 for the color ink cartridge.
Shut down the printing machine access door.

These steps will help to solve this error in minimal time. To remove this type of issue you can apply the above-mentioned steps. If the given steps are unable to change the printhead then don’t worry. To remove this error you can contact the experts through Kodak printer tech support phone number +(1)-888-846-5560 that is toll-free for everyone. If the contact number is busy then you can contact us through email.

2020-02-04

How to Solve the Brother Printer Error Code 51?

How to Solve the Brother Printer Error Code 51?

Are you suffering from Brother printer error code 51? If yes, then you don’t need to worry. The experts are always here to help. They will give you one of the best troubleshooting solutions to fix Brother printer error code 51. This is a common error that occurs due to many reasons. To solve this error, you need to apply the best troubleshooting steps. To know the best solutions, you can read this post without any hassle. If you have any issues related to this printing device then you don’t need to worry. You can contact the experts to get perfect solutions. We have a team of experts and talented technicians. They know very well how to deal with this type of issue. If you want to know how to solve Brother printer error code 51 then you are in the right place. Brother Printer Technical Support USA team is available at 24*7 for your help.

Solutions to fix Brother printer error 51

To overcome this type of issue, you need to apply the best troubleshooting steps. For removing this problem you can apply the given troubleshooting solutions without any trouble.

Solution 1. Check for Objects such as a scrap of paper, paper clip inside the machine:

At first, you will need to check for the foreign objects inside your machine. To do this, perform the tasks that are mentioned below.
Disconnect the Brother printing device from the power outlet and open the cover of the printing device’s scanner by pulling up on the lower right corner of the cover.
Look inside the Brother printing machine and remove any foreign objects if any is inserted inside it.
If you see jammed paper or another item inside anywhere in this area, gently pull it out and then shut down the scanner cover safely and securely.

Solution 2. Turn the print head and properly check under the print head

First of all, disconnect the printing device from the power outlet.
Then, open the cover of the scanner.
After doing this, check the position of the print head. You can simply check if from the left-hand side of the area of the platen.
Gently move the print head to the center. Careful while you are moving printhead you could not force print head to bring it in the middle center.
You need to check to see under the print head, if there is any particular object found, replace it quickly.
After doing this, shut down the cover and then reconnect the machine to the power outlet.
In the last, print a test page.

If the given solutions are not compatible to solve your problem, so you don’t need to worry. The experts are always here to help. They will give you one of the best solutions to solve your problem. The experts know very well how to handle the worst situation, so you can trust them. They will give you one of the best solutions. Brother printer customer support number +(1)-888-846-5560.

2020-01-20

How to Remove Lexmark Printer Error Code 1102?

Lexmark printer has many features that make it useful and effective. Through the help of this printing device, you can easily do your printing task. But some users encounter Lexmark printer error code 1102. If you are suffering from this type of error, then you don’t need to worry. The experts are always here to help. They will give you one of the best solutions according to your problem. The professionals have many years of experience in this field, so they know very well how to remove Lexmark printer error code 1102. To remove this error, you can also apply the given solutions. If you have any other issues related to this printing device, so don’t worry. Lexmark printer repair team knows very well how to deal with this type of problem so that they can handle it.

Causes for Lexmark Printer Error code 1102

Some of the causes behind this error code are mentioned here:

The error code arose when you built a wrong position for the cartridge of the printing device.
In a situation when a Lexmark printing machine user does not have a power supply on the printer or computer.
The error 1102 occur due to an incorrect setting of the printing device head.
You face this error when a printing machine's power cord does not work correctly.

Solutions to fix Lexmark Printer Error Code 1102

Solution 1. Reinsert the print cartridge

First of all, try to exit the cartridge’s carries lids but not before removing the print cartridges.
After that, you need to disconnect the cord of the printer from the source of electrical supply.
Then you have to disconnect the printer cord, reconnect it again into the power plug.
Once you have finished these steps, error 1102 can be solved.

Also Read: Procedure to Solve Lexmark Printer Spooler Problems?

Solution 2. Replace the black ink cartridge

To solve error 1102, you need to change the black print cartridge of the printing device with a new one. To do it, follow the below-mentioned steps.

First, you change the black print cartridge with a new one in case you are facing this issue.
After changing the ink cartridge, if the error does not occur, you can reinsert the color print cartridge.
But if the error occurs again, remove the cartridge of the color print with a new one.

If none of these methods solve the issue, then go to the next solution.

Solution 3. Switch off the ALO

While switching off the ALO, you require to follow the given steps.

From the backside of the printing machine, switch off the ALO power supply.
After doing this, wait for 30 to 40 seconds and then try to reinsert the power supply. You can now turn on the power supply of the ALO.
Now, you can restart the printer and your computer. Take a test printout to check the quality of the printing machine.

Solution 4. Clear the cartridge

After replacing the cartridges, clean the contacts.
Clean the nozzles of cartridge very carefully through cleaning it with a clean cloth dubbed in water.
Wipe the cartridge with a dry and clean cloth.
Before you reinsert the nozzles, make sure that it is completely dry.
The users can clean the contacts of the print heads with a cotton swab so that there are no remains of any residue on the contacts.
Print out a test output.
If the test printout is perfect, that means the error solved.

For any other help, you can contact us at any time we are available at your service. We have a team of experts to solve this kind of problem. To contact us, call on Lexmark Printer support phone number +(1)-888-846-5560 which is available 24*7.

2020-01-07

How to Fix Brother Printer Error Code 73?

Brother printer is the best printing device that has many features to print. It is very simple to use, therefore, you can use it at your home as well as your office. But such as other printers, Brother printer occurs some common errors. Brother printer error code 73 is one of them. There are several causes behind this error. If you are facing the same error then you don’t need to worry. The experts are always here to help. They will give you one of the best solutions to eliminate Brother printer error code 73. You can contact the experts at any time. Before contacting them, you should try to solve it by yourself. If you fail to solve this problem by yourself. Then, you can take the help of professionals to solve this type of error. The experts will help to solve all types of errors in minimal time. Brother printer repair support service is available around the clock for your help.

Troubleshooting steps to solve Brother printer error 73

To overcome error code 73 you need to apply the best troubleshooting steps that will help to solve this problem as soon as possible. If you are suffering from this error and you want to overcome this problem then you don’t need to worry. You can also try the given instructions to solve this error.

Strengthen maintained on the optics of the laser unit. If a printing machine is started when it is quite cold, condensation will get on the lenses and mirrors in the optics on the assembly of the laser scanner. Whenever you are taking a laser inkjet printer out of the cold room into room temperatures always let the printer sit for various hours before attempting to turn it on and then use it. The use of 4 hours is recommended.
Reset the harness connectors of laser scanner assembly.
In case of failure of the laser unit, remove the assembly of the laser scanner.
Engine PCB failure properly removes the engine PCB board.
If the error still persists, then restart the system.

Hopefully, your problem has been solved. If no, so you don’t need to cry. We are always here to help. We will give you one of the best solutions to solve your problem. We have great technicians who are well educated and expertise in this field. To get more help call on toll-free Brother Printer Customer Service phone number +(1)-888-846-5560.

2020-01-07

How to Fix HP Printer Not Scanning Problem?

HP printer is the best printing device that has many features. Using it you can easily print out as well as scan your important documents without any trouble. Sometimes due to technical default, the printing device does not scan your documents. If your HP printer does not scan your documents properly then you don’t need to worry. Here in this blog, we will discuss the complete process to fix the HP printer not scanning the problem. If you are unable to do this on your own then you don’t need to worry. The experts are always here to help. So you can contact them at any time to fix this problem without any trouble. The experts have many years of experience in this field. So they know how to deal with this problem. To get perfect solutions to contact the professionals of the HP Photosmart 5520 printer support team.

Steps to Fix HP Printer is Not scanning Issue.

Here we provide some secure solutions for your help so quickly follow the given solutions and fix your problem with ease.

Step 1. Being with an HP printer and scan doctor

By using this tool, you can also solve your problems. HP offers an inbuilt tool to solve the technical error with your device. Easily download this tool and run this tool on your device, so solve your problems. It automatically searches the trouble in your system and fixes them instantly. Therefore, you can easily fix your entire issues.

Step 2. Uninstall the HP Printer

If the HP scanner and doctor fail to solve your issue, then you need to uninstall the printer. It is not a tough task, so you can easily do it by following the given steps.

Replace the USB cable from your computer and printer to disconnect the connection.
Using the search window. Click upon program and features.
From the list of programs, choose the name of the HP printer and press to uninstall tab.
After that, press yes to confirm.
Now, follow the on-screen instructions to remove the printer program.
In the last reset your device.

Step 3. Get the latest driver for your printer

Many times due to the faulty driver, your printer won’t work properly. In this case, you will need to install the latest driver for your HP printer. If you don’t know how to get the most recent driver, then you don’t need to worry. Follow the given instruction to do it.

Switch on the printing machine and unplug the USB cable through which your device is connected to your printing machine.
While trying to install the printer’s software, you will be advised to connect the USB cable again.
Go to https://support.hp.com/in-en/drivers to install the correct driver.
If you see, let’s identify your product to get started page. Choose printer.
Then provide the name, type, and model number for your printer and press submit.
Press change to and select the version of your operating system.
Now press downloading link. While installing, make sure you choose a typical or recommended installation type.

Step 4. Reset your device

After installing devices reboot your device and printer.

Press and hold the power button to turn off your printer .
Close all the running programs open in the background and reset your device.
Switch on your printer and start scanning again.

If the given solutions are not compatible to solve this problem so you don’t need to worry. The professionals are always here to help. They easily deal with this problem. So you can contact the experts through HP printer tech support number +(1)-888-846-5560.

2019-12-04

How to Fix HP Printer Error Code 20 in Few Clicks?

tech support printer support hp printer support hp printer printer support number

f:id:printersupportinusa:20191204212629j:plain

How to Fix HP Printer Error Code 20 in Few Clicks?

HP printer error code is a very common error code that occurs when an issue with the HP Printer not being correctly configured on the PC. This error typically shows when using your system to try and print a document, image or spreadsheet. Due to this error, you can’t print your important documents. If you want to remove this error, then you need to apply the best troubleshooting steps. If you don’t know about its solutions, so don’t worry. Here we have a team of experts that will help to solve your problem as soon as possible. They know very well which solutions work properly to solve HP printer error 20. To get eliminate this error, contact the professional of the HP printer customer support team. Before contacting the professionals you can apply the given solutions that are mentioned below:

Steps to Remove HP printer error 20

In this section, we are going to share the troubleshooting steps that you can easily follow to rectify this error forever. Follow the given instructions one by one to solve this error code.

Instruction 1. Check the printer is set as the default printer

Hit the start button, print, and faxes.
Then, check the printer, if the mark is missing right-hit on the printing device and press set as a default printer option.
Once it has done that, just right click on the printer and choose the print test page to print a self-test page.

Also Read: Guide To Fix HP Printing Error The Printer Couldn't Print

Instruction 2. Reinstall the USB Composite Device Drivers

Open run in run type command " devmgmt.msc" and press enter.
Now, hit the hardware tab and then press the Device manager option.
after doing this, in the device manager window, double click universal serial bus controllers option.
Now, right-hit on USB composite device select uninstall and press OK.
Then, disconnect the USB wire from the operating system and plug it again.
then, install the drivers, follow the on-screen instructions in the found new hardware utility.
Then, press the start, choose printer and faxes to open the printer settings.
Now, search the icon which represents your printing device then click the print test page which will print a window self-test page.

Instruction 3. Uninstall and reinstall the HP printer

If the above-mentioned solutions fail to solve this error, then uninstall and reinstall the HP printer to remove this error. This is a very simple and effective instruction that will help to solve this type of issue.

Instruction 4. Clean the Registry

Sometimes due to Registry, you face this type of issue. The registry is a database inside the windows system, which stores vital settings and files that your system and software needs, which stores vital settings and files that your PC & software required to run. To fix this error you need to clean out the registry by using a registry cleaner program.

Hopefully, your problem has been solved. If you are facing any issue during the process then you don’t need to worry. The experts are always here to help. They will give you one of the best solutions to fix this issue. To get the best solutions, call on HP printer tech support phone number +(1)-888-846-5560.